A few notes on coordinate systems:
X-Plane uses three kinds of coordinates. Global coordinates are specified as latitude, longitude and elevation. This coordinate system never changes but is not very precise.
OpenGL (or 'local') coordinates are cartesian and shift with the plane. They offer more precision and are used for 3-d OpenGL drawing. The X axis is aligned east-west with positive X meaning east. The Y axis is aligned straight up and down at the point 0,0,0 (but since the earth is round it is not truly straight up and down at other points). The Z axis is aligned north-south at 0, 0, 0 with positive Z pointing south (but since the earth is round it isn't exactly north-south as you move east or west of 0, 0, 0). One unit is one meter and the point 0,0,0 is on the surface of the earth at sea level for some latitude and longitude picked by the sim such that the user's aircraft is reasonably nearby.
Cockpit coordinates are 2d, with the X axis horizontal and the Y axis vertical. The point 0,0 is the bottom left and 1024,768 is the upper right of the screen. This is true no matter what resolution the user's monitor is in; when running in higher resolution, graphics will be scaled.
Use X-Plane's routines to convert between global and local coordinates. Do not attempt to do this conversion yourself; the precise 'roundness' of X-Plane's physics model may not match your own, and (to make things weirder) the user can potentially customize the physics of the current planet.
XPLM_API void XPLMSetGraphicsState( int inEnableFog, int inNumberTexUnits, int inEnableLighting, int inEnableAlphaTesting, int inEnableAlphaBlending, int inEnableDepthTesting, int inEnableDepthWriting);XPLMSetGraphicsState changes OpenGL's graphics state in a number of ways:
inEnableFog - enables or disables fog, equivalent to: glEnable(GL_FOG);
inNumberTexUnits - enables or disables a number of multitexturing units. If the number is 0, 2d texturing is disabled entirely, as in glDisable(GL_TEXTURE_2D); Otherwise, 2d texturing is enabled, and a number of multitexturing units are enabled sequentially, starting with unit 0, e.g. glActiveTextureARB(GL_TEXTURE0_ARB); glEnable (GL_TEXTURE_2D);
inEnableLighting - enables or disables OpenGL lighting, e.g. glEnable(GL_LIGHTING); glEnable(GL_LIGHT0);
inEnableAlphaTesting - enables or disables the alpha test per pixel, e.g. glEnable(GL_ALPHA_TEST);
inEnableAlphaBlending - enables or disables alpha blending per pixel, e.g. glEnable(GL_BLEND);
inEnableDepthTesting - enables per pixel depth testing, as in glEnable(GL_DEPTH_TEST);
inEnableDepthWriting - enables writing back of depth information to the depth bufffer, as in glDepthMask(GL_TRUE);
The purpose of this function is to change OpenGL state while keeping X-Plane aware of the state changes; this keeps X-Plane from getting surprised by OGL state changes, and prevents X-Plane and plug-ins from having to set all state before all draws; XPLMSetGraphicsState internally skips calls to change state that is already properly enabled.
X-Plane does not have a 'default' OGL state to plug-ins; plug-ins should totally set OGL state before drawing. Use XPLMSetGraphicsState instead of any of the above OpenGL calls.
WARNING: Any routine that performs drawing (e.g. XPLMDrawString or widget code) may change X-Plane's state. Always set state before drawing after unknown code has executed.
XPLM_API void XPLMBindTexture2d( int inTextureNum, int inTextureUnit);XPLMBindTexture2d changes what texture is bound to the 2d texturing target. This routine caches the current 2d texture across all texturing units in the sim and plug-ins, preventing extraneous binding. For example, consider several plug-ins running in series; if they all use the 'general interface' bitmap to do UI, calling this function will skip the rebinding of the general interface texture on all but the first plug-in, which can provide better frame rate son some graphics cards.
inTextureID is the ID of the texture object to bind; inTextureUnit is a zero-based texture unit (e.g. 0 for the first one), up to a maximum of 4 units. (This number may increase in future versions of x-plane.)
Use this routine instead of glBindTexture(GL_TEXTURE_2D, ....);
XPLM_API void XPLMGenerateTextureNumbers( int * outTextureIDs, int inCount);This routine generates unused texture numbers that a plug-in can use to safely bind textures. Use this routine instead of glGenTextures; glGenTextures will allocate texture numbers in ranges that X-Plane reserves for its own use but does not always use; for example, it might provide an ID within the range of textures reserved for terrain...loading a new .env file as the plane flies might then cause X-Plane to use this texture ID. X-Plane will then overwrite the plug-ins texture. This routine returns texture IDs that are out of X-Plane's usage range.
XPLM_API int XPLMGetTexture( XPLMTextureID inTexture);XPLMGetTexture returns the OpenGL texture enumeration of an X-Plane texture based on a generic identifying code. For example, you can get the texture for X-Plane's UI bitmaps. This allows you to build new gauges that take advantage of x-plane's textures, for smooth artwork integration and also saving texture memory. Note that the texture might not be loaded yet, depending on what the plane's panel contains.
OPEN ISSUE: We really need a way to make sure X-Plane loads this texture if it isn't around, or at least a way to find out whether it is loaded or not.
XPLM_API void XPLMWorldToLocal( double inLatitude, double inLongitude, double inAltitude, double * outX, double * outY, double * outZ);This routine translates coordinates from latitude, longitude, and altitude to local scene coordinates.
XPLM_API void XPLMLocalToWorld( double inX, double inY, double inZ, double * outLatitude, double * outLongitude, double * outAltitude);This routine translates a local coordinate triplet back into latitude, longitude, and altitude. NOTE: world coordinates are less precise than local coordinates; you should try to avoid round tripping from local to world and back.
XPLM_API void XPLMDrawTranslucentDarkBox( int inLeft, int inTop, int inRight, int inBottom);This routine draws a translucent dark box, partially obscuring parts of the screen but making text easy to read. This is the same graphics primitive used by X-Plane to show text files and ATC info.
WARNING: Some of these fonts are no longer supported or may have changed geometries. For maximum copmatibility, use xplmFont_Basic for all user interface.
Note: X-Plane 7 supports proportional-spaced fonts. Since no measuring routine is available yet, the SDK will normally draw using a fixed-width font. You can use a dataref to enable proportional font drawing on XP7 if you want to.
Austin uses these fonts for radios
Austin uses narrow radio fonts for DME.
|xplmFont_Timer||14||cockpit TIMER and OAT|
|xplmFont_FullRound||15||cockpit large adaptive (airspeed)|
|xplmFont_SmallRound||16||cockpit small adaptive (engine)|
XPLM_API void XPLMDrawString( float * inColorRGB, int inXOffset, int inYOffset, char * inChar, int * inWordWrapWidth, /* Can be NULL */ XPLMFontID inFontID);This routine draws a NULL termianted string in a given font. Pass in the lower left pixel that the character is to be drawn onto. Also pass the character and font ID. This function returns the x offset plus the width of all drawn characters. The color to draw in is specified as a pointer to an array of three floating point colors, representing RGB intensities from 0.0 to 1.0.
XPLM_API void XPLMDrawNumber( float * inColorRGB, int inXOffset, int inYOffset, double inValue, int inDigits, int inDecimals, int inShowSign, XPLMFontID inFontID);This routine draws a number similar to the digit editing fields in PlaneMaker and data output display in X-Plane. Pass in a color, a position, a floating point value, and formatting info. Specify how many integer and how many decimal digits to show and whether to show a sign, as well as a character set. This routine returns the xOffset plus width of the string drawn.
XPLM_API void XPLMGetFontDimensions( XPLMFontID inFontID, int * outCharWidth, /* Can be NULL */ int * outCharHeight, /* Can be NULL */ int * outDigitsOnly); /* Can be NULL */This routine returns the width and height of a character in a given font. It also tells you if the font only supports numeric digits. Pass NULL if you don't need a given field.
All rights reserved. See license.txt for usage.
X-Plane SDK Version: 1.0.2